ADSB# Quickstart

I’m working on a quickstart guide for the new ADSB# ( and I’ll be posting it up here in a day or so. I will include interface guides for PlanePlotter and Virtual Radar Server.

This entry was posted in SDR. Bookmark the permalink.

2 Responses to ADSB# Quickstart

  1. AL says:

    ADSB# is great. I was impressed by how much lighter on resources it is compared to running the ADSB# plugin in SDR#. (used SDR# to find the frequency correction of my receiver)

    I’m receiving a nice 100+ mile radius on an RTL dongle with a DIY vertical antenna mounted indoors, very impressive.

    What I can’t figure out is how to set ADSB# to come up running or to start it from the command line while forcing it to start and use a given correction value. I want my ADSB system to start functioning automatically on boot. Any command line options or start up configuration available?
    (note: tried to comment on but get a WP error)

    73 Thanks!

  2. john says:

    THANK YOU so much!!!!!! A noobie like me is lost with this guide!! Really!

Leave a Reply

Your email address will not be published. Required fields are marked *

This blog is kept spam free by WP-SpamFree.